Thursday, April 22, 2010

Zipper Lust

Readers, have you ever seen Riri zippers? Pacific Trimming here in New York carries them, and they've just increased their stock to take over an entire wall! I first read about these zippers in Threads magazine: they're renowned for being very high-quality. And they're really quite beautiful too; the teeth are so glinty and jewel-like in the hypnotic way that very shiny things are. Riri is a Swiss company and the zippers are made by hand in a small town in Italy. Doesn't that all sound so romantic?

I love the way they slide open smoothly, and the metal teeth are pretty in a utilitarian way. You'll find metal zips in vintage couture, like this Ceil Chapman below. The last time I went to Anthropologie, I noticed a lot of the retro summer dresses had metal zips as well. I think it adds a lovely authentic touch to vintage-inspired dresses and the mixture of beauty and sturdiness really appeals to me.

I ended up buying two of these lovely zippers: one plain white and one in black satin. They're not cheap: they run around $12 a pop. But they're just so lovely and special that I can't wait to put them into some new dresses.

Here's a peek at some satin-tape zippers. Wouldn't they be pretty in an exposed application?

Sadly, Riri zippers are difficult to find online. The Sewing Place has a nice selection of the decorative type with the multi-colored teeth, which isn't really my thing. But perhaps you'll dig it:

However, Pacific Trimming has tons of info about the zippers on their website, so perhaps you can call or e-mail them with a mail order. (Though Pacific is always such a madhouse it's hard to imagine them running a mail order business. But hey, who knows?)

Have you ever used these zips? Do you think $12 for a zipper is insane? Let me hear it in the comments!

36 comments:

  1. Oh my goodness they're beautiful zips!! I've never heard of them and I do think $12 dollars is a bit crazy for a zip...but I want one! Or several haha. I'm going check them out and see if anyone over here in Britain stocks them. Metal zippers in vintage repro dresses really adds that little something extra.
    Lottie x

    ReplyDelete
  2. Great minds, Lottie - I've just emailed E L Watson (their agent over here, apparently) to ask who/where stocks them.

    As for the cost, well... I guess it depends on whether you think it's worth it, relative to your project. I'm making some dresses for work at the moment and I really love the idea of these zips - I hope I can find a supplier soon!

    RG x

    ReplyDelete
  3. I 'accidentally' bought 100 metal teeth zippers on ebay a few months ago. I thought I was buying plastic teethed ones.

    My problem with them is that I don't know how to sew them... does your opening have to match the zip length exactly? Normally with the plastic zip I just sew over the end at the length I need and cut any excess length off. Perhaps I need to google up on it.

    ReplyDelete
  4. Claire, you can shorten metal teethed zippers with patience and a pair of pliers.

    As for zipper lust? I'm lusting over japanese lace zippers, such as this one. I want to find a project to use one, or two, on.

    ReplyDelete
  5. Ooooh! I adore metal zippers--I'm always on the lookout for vintage metal zippers when I'm vintage shopping. I have to admit though: as much as I love working with vintage zippers, I couldn't see myself spending $12 for every zipper, for every project. But, for something nice--like a fancy day dress or an evening gown, I'd totally jump for a zipper that was beautiful and reliable!

    To answer Clare's question about shortening metal zippers... You just measure the length you need, and use pliers to pull off an inch or so of teeth below that on either side of the zipper. Sew a stop at the bottom edge of the zipper teeth (I use heavy duty thread sewn over the edges of the tapes a few times), and insert into the opening as usual. It's a bit of work, but can be done!

    ♥ Casey
    blog | elegantmusings.com

    ReplyDelete
  6. Surprisingly, there's a little apparel fabric store here in St. louis that carries these zippers (albeit a smaller selection). I haven't found a need for an exposed pretty zipper because I'm really into invisible zippers, but I could see they would be v. pretty on a wiggle skirt or something like that, maybe up the front?

    ReplyDelete
  7. Oh, I do love metal zippers, especially exposed, and those are so pretty.
    The price is insane for a zipper, but if you think about it as a masterpiece, all made by hand... hmm, that's a different story, isn't it?

    ReplyDelete
  8. Darn! Another covetable sewing notion, actually made in Europe that I haven't seen here in London.

    ReplyDelete
  9. Oh I like those. I wouldn't put one in just anything but for something special I totally would.

    ReplyDelete
  10. I have used Riri zips for handbags and special dresses. They are the best and they are worth every penny!

    ReplyDelete
  11. It's always a good idea to check ebay for Riri zippers...last year I won a lot of twenty zippers for around fifteen dollars.

    ReplyDelete
  12. Those multicoloured ones are so cute. And satin zippers, how fabulous.

    I'm still an invisible zipper fan all the way though. More than ever since I heeded your advice about sewing machine feet in one of your earlier posts and I got myself an invisible zipper foot. Now I can't believe I ever tried sewing on zippers without one, It is so wonderful and makes for such neat zips!

    ReplyDelete
  13. I could see those being really great as an exposed application, but that's not really my thing.

    $12 is a lot for a zipper, but if you're putting high quality materials into any particular garment, why not a high quality zipper as well?

    I'm actually not much of a metal teeth zipper person myself, it's one of the few areas where I prefer plastic. I like having teeth that match my fabric if it's not an invisible zip.

    There's also the durability issue - there are trade-offs for everything. On the one hand, invisible zips are sturdier than plastic in that they're less likely to break over time. However, metal zips may well seize at some point in the future. I've volunteered, worked in, and again volunteer with historical costume collections and it's very common that metal zips which are 30+ years don't want to zip or unzip anymore.

    This is probably not a serious consideration for more people (who thinks of the longevity of their own clothes to such a degree) but I thought I'd mention it just in case.

    ReplyDelete
  14. Did you see this NYT article about the store ZipperStop on the LES? I want to go there the next time I'm in NY:

    http://www.nytimes.com/2010/04/19/nyregion/19zipperman.html

    ReplyDelete
  15. I used them for my Oscar de la Renta motorcycle jacket knockoff. The Oscar I was knocking off, if you blew it up, actually had Riri zippers with the name clearly visible. I spent $68 for them. The long separating zipper had to come from a longer one, so it cost quite a lot. There were 4 other zippers in the jacket and they are worth every penny. Gorgeous satin tapes and the teeth are like glittering jewelry. Wroth every damn penny.
    I used a Riri in a leather skirt I made last fall and tried to order this by phone. Good luck on that. I ended up buying it on a trip into the city. You can try emailing them since I haven't found an order page on the site.

    ReplyDelete
  16. Oh I wish you could buy them online! I'll have to check Ebay :)
    $12 is a lot for a zipper, but if in comparison, sometimes special buttons can cost that much. And one of the joys of sewing is that you can choose expensive trims since you're not mass-producing the garment! I'd spend that much on a zipper for something really special, or if a super-durable zipper was needed - but not for every dress I make.
    Thanks for sharing!

    ReplyDelete
  17. So so jealous! I really wish we had a store like that here. No such luck! I don't think $12 is too much for a good zipper, I mean come on, if it lasts forever why not? Gorgeous.

    ReplyDelete
  18. I have a stash of fabulous Riri zippers... last fall I found a listing on craigslist for a small-ish designer (Abaete) going out of business and selling off all of their supplies. I scored a lot of sweet stuff, and they had a ton of Riri zippers that they were selling for $2 apiece. I knew Riris were nice but didn't know how much they cost - I grabbed 15 of them and bargained to get them for $25. If I had known better, I would have bought every single one they had. For now, my Riris are waiting for the perfect projects to come along. I managed to get matching zippers in a few different lengths, as well as some miscellaneous ones, and I'm always keeping an eye out for inspirational exposed zipper projects. I'd love to make some kind of jacket, where I can have 2 small zippered pockets and 2 big zippered pockets, all matching the separating zipper...cuz yeah, I've got 3 sets of those!

    ReplyDelete
  19. Oh no, a new fabulous notion to covet! I wonder if I can find them in the garment district here in L.A.? I actually think the multicolored teeth are sort of cute, if used in the right way -- say, as an exposed zipper in a plain black and white skirt. (Say, that happens to be my current project!)

    ReplyDelete
  20. Tis an expensive zip but they are nice. I love the multicoloured teeth. Definitely my thing. Repurposed Girl, I'd be interested in a UK stockist if you find one :o)

    ReplyDelete
  21. Hi Gertie, I see since yesterday you've jumped over the 1000 followers barrier! Congratulations, that was very quick!

    ReplyDelete
  22. Thank you, Nathalie! I'll have a special surprise tomorrow to celebrate - so make sure to stop by!

    ReplyDelete
  23. I wouldn't say $12 is insane if you can afford it and it's for a special project. Of course higher-quality, hand-made things are going to have greater cost! I'll stick to searching for vintage metal zips though.

    ReplyDelete
  24. Delightful-I adore metal zippers. It reminds me of when life was more permanent and less disposable. I would spend the money.
    Jana

    ReplyDelete
  25. Gosh who knew zips could be so pretty?? I'm making a vintage repro dress that is just screaming for one, normally i would agree $12 is a little steep for a zip, prefer to splurge on the fabric, but then i remembered only yesterday i ended up spending $22 for 8 buttons ( by accident i didn't realize how much they were untill looking at receipt later... oops!)so maybe it's not that bad??
    :-) Ruby Slippers
    rubyslippersvintage.blogspot.com

    ReplyDelete
  26. They do look like beautiful zips but I don't really like the 'zip showing' look so that would be lost on me. Also I think $12 is way too much to spend on a zip that I will do my best to make sure is hidden!! Give me a good inviisble Zip anyday, that just looks like part of the seam!

    Sorry I seem to be a bit of a lone voice here!!

    ReplyDelete
  27. http://www.thesewingplace.com/index.asp?PageAction=VIEWPROD&ProdID=5012
    This website has them for $10.99 usd and they take international orders too!

    ReplyDelete
  28. I love these zippers. I purchased one, won't say how much it cost, LOL I want to put it in the back of a dress exposed. I couldn't make up my mind there were so many beautiful ones! I'll be in NY May 1, can't wait to go back again,

    ReplyDelete
  29. Well, to each his own. When I started sewing metal zippers were the only option. I was so jazzed when the plastic ones came in. They seemed more unintrusive.

    ReplyDelete
  30. A co-worker of mine brought in some scraps for us to pick through. There was one metal zipper that had a hook and eye attached to it. It was something I'd never seen before and at the same time felt really disappointed for they saying popped in my head 'they don't make zippers like the use to'. I love zipper lots on etsy or ebay, you can get a few for $20, I love having excess zippers, I never have to worry about picking one up or having to wait to finish a dress until I get one. :D

    ReplyDelete
  31. You have given me zipper lust for sure. I am dying to make a dress with a beautiful exposed zipper, before they are out of fashion.

    ReplyDelete
  32. I only used Riri zippers until I moved to the US 3 years ago. Since they are so hard to find here, I always try to plan ahead my projects and stock up when I am in Switzerland. The price is pretty high but you will use them forewer. Some of mine are in the third garment - I never throw them away but reuse them many times... have fun!

    ReplyDelete
  33. Despite having sewn for many years I don't think I've ever used Riri zippers. But my ex was madly in love with them... I think he had plans to go to Switzerland just to visit the factory! But then, our first date was to a button shop, so I shouldn't have been surprised...

    ReplyDelete
  34. These are beautiful and perfect for a special project that I have in the works. I contacted the UK guy for Riri and got this response:

    "All Riri zips are made to order, minimum quantity 30 pcs of a style, length
    & colour.

    You can buy Riri retail from London Trimmings
    Tel - 020 7790 2233
    www.londontrimmings.co.uk"

    Having checked the londontrimmings website it looks like they only sell to trade but might be up for selling to individuals, I guess it's time to turn on the charm and give them a call...unless 29 other people want to go in for a bulk buy with me??

    Candy

    ReplyDelete
  35. Riri is one of the oldest brands and was established in 1936 in Switzerland. All their metal zippers are still produced in Switzerland. Their zippers are polished (smooth feeling) and manufactured to a high Swiss standard. Pacific Trimming or Panda (NYC 38th St.) have a very good selection and they ship worldwide.

    ReplyDelete
  36. I love these zippers. I'm trying to think of a pattern that would make the zipper really stand out. Thank you. They are hard to get online. Someone should make it easier

    ReplyDelete

Thanks for your comments; I read each and every one! xo Gertie

© Gertie's Blog For Better Sewing. Powered by Cake